top-banner-left.png
banner-top-center2.png
top-banner-right.png
+44 (0) 116 367 0533

Truma DuoControl CS Changeover Regulator 30mbar with Crash Sensor and W21.8 M20 Pigtails

(No reviews yet) Write a Review
SKU:
400352
Availability:
Next working day delivery available
Weight:
1.00 KGS
Shipping:
Calculated at Checkout
  • Truma DuoControl CS Changeover Regulator 30mbar with Crash Sensor and W21.8 M20 Pigtails
  • Truma DuoControl CS Changeover Regulator 30mbar with Crash Sensor
  • Truma DuoControl CS Changeover Regulator 30mbar with Crash Sensor side view
  • Truma DuoControl CS Changeover Regulator 30mbar with Crash Sensor packaging
  • Truma DuoControl CS Changeover Regulator 30mbar with Crash Sensor manual
£179.90 Inc. VAT
£149.92
Ex. VAT

0% interest for 4 months with PayPal Credit. Find out more

Description

Truma DuoControl CS Regulator with Crash Sensor 30mbar and set of two W21.8 LH Shell to W20 M20 50cm Pigtails

Motorhome gas pressure regulator with crash sensor for two-cylinder operation

  • Easy to see if the crash sensor has been triggered and easy to reset
  • Shows which cylinder is in use and, consequently, if it is full or empty
  • Automatically switches over from the empty cylinder to the full one
  • Lightweight
  • Quick to install
  • Available as vertical and horizontal versions

van to the new generation of Truma DuoControl CS gas pressure regulators. The system automatically switches over to the second gas cylinder when the operating cylinder is empty. The integrated crash sensor allows you to heat your vehicle safely while you're driving. It prevents gas escaping should you be involved in an accident.

If the crash sensor has been triggered, you can reset it yourself. So that the gas pressure regulator system is ready for operation again quickly, simply press the yellow reset button on DuoControl CS.

The regulator output is 1.5 kg/h, which is suitable for maximum consumption. You don't have to calculate appliance consumption or the flow rate of the gas system.

  • Energy sources: Propane / butane
  • Inlet pressure: 0.7 – 16 bar
  • Outlet pressure: 30 mbar
  • Regulator output: max. 1.5 kg/h
  • Regulator inlet: male thread M20 x 1.5 (G. 13)

0 Reviews