VIALLE
Vialle LSi: Tank Ventilation Set (I)
- SKU:
- 102114
- Weight:
- 0.50 KGS
- Shipping:
- Calculated at Checkout
Description
Vialle LSi: Tank Ventilation Set (I)
The ventilation set is used when installing an External or Cylindrical tank in the vehicle.
Installation:
Drill a hole of 32mm in the bottom of the vehicle where the ventilation is going to exit the vehicle.
The ventilation must be installed facing towards the ground. If possible place the longer side of the grommet towards the front of the vehicle, the short side facing towards the back.
The hole must be sprayed for corrosion resistance.
Attention:
Vialle Ventilation hose is slightly smallet than the standard 30mm ventilation hose.
0 Reviews
Related Products
Out of stock
VIALLE
Vialle LSi: Fuel Line Set (B)
£79.99
Vialle LSi: Fuel Line Set (B)
Set of two liquid gas pipes for Vialle LSi Autogas System: LPG Feeding pipe and LPG return pipe.
General description
The LiquidSi system uses 2...
102108
£79.99
VIALLE
Vialle LSi: Injector Nozzle Set (D)
£18.99
Vialle LSi: Injector Nozzle Set (D) Injector Nozzle with mountig accessories and pipe. Set is dedicated for a single Vialle LSi injector. Thread on the manifold needs to be M10x1 ...
102111
£18.99
Out of stock
VIALLE
Vialle LSi : 4CYL ECU (F4)
£218.99
Vialle LSi : 4CYL ECU (F4) Description: The F‐module contains the ECU, the fuel switch, the full wiring loom, the temperature sensor and the fuses. The ECU called the TEC‐unit, calculates the...
102105
£218.99
Out of stock
VIALLE
Vialle LSi: Solenoid Accessories Set (C2)
£39.99
Vialle LSi: Solenoid Valve (C1)
Accessories set is to be used with the valve in order to make the connections.
102110
£39.99
Out of stock
VIALLE
Vialle LSi: Toroidal Tank Cover (J2)
£28.89
Vialle LSi: Toroidal Tank Cover (J2) The tank cover is used to isolate unwanted sounds from the LPG tank. It can be used for toroidal tank. Only to be used inside the vehicle. Installation:...
102116
£28.89
