LPGTECH Dragon Standard Flow 4 Cylinders Injectors Rail
- Piston injection type
- Available Versions: 2, 3, 4 cylinders
- Possibility of combining the injectors
- External nozzle diameter: 6mm
- Coil resistance: 2 Ω
- Opening time: <1.9 ms
- Closing time: <0.9 ms
- Max gas pressure: 6 bar
- Max gas flow: 130l/min
- Temperature range: -40 - +140 °C
- Output nozzles and supply inlet port attached
- 2 years warranty
Size of injector nozzles according to
engine power per single cylinder (estimated values):
Needed to replace 2 injectors out of 8. Oroginally installed injectors were only 3 years old and driven approx. 12000km. Original injectors developed loud ticking and engine misfiring while on LPG. After replacing faulty injectors, system returned to normal operation. Bought a rail with 4 injectors to get better price per 1 injector.
The cause for injector ticking was that the cushion material(behind the piston-valve) in the injector was not there anymore. That caused the piston travel to increase from 0.45mm (measured from working injector) to 0.8mm(measured from faulty injector). That in turn allowed too much LPG to the cylinders and caused misfires.
Swapping out these injectors is very easy thanks to their rail system.
I purchass a dragon injectors, Very fast shipping and quiet operation....Thank's
Customers Also Viewed