KING 5/6/8 CYLINDERS OBDII ECU
The new King 5-6-8CYL OBDII ECU, manufactured by AEB, has been designed to enable conversions of 5-, 6- and 8-cylinder engines equipped with sequential petrol injection. The controller offers high efficiency, but is at the same time compact in size and easy to fit.
- ECU control unit
- MAP sensor (pressure and vacuum)
- Switch with push button
- Wiring harness
- Supply voltage: Vbatt=10÷16V
- Operating temperature: -40÷120°C
- Current absorption with the actuators disabled: Imax=0.5A
- Actuators managed:
- 8 gas injectors with the following characteristics Imax=6, Vbatt,max=16V
- 2 power outputs for gas solenoid valves [Pmax=25W, Imax=2A (power and maximum current for each output with two outputs enabled)- Pmax=50W, Imax=4A (power and maximum current with just one output enabled)]
- Sensors managed:
- Gas pressure sensor: AEB025, 463500000, 463059000, 463505000
- - MAP sensor: AEB025, 463500000, 463059000, 463505000, the car’s original sensor
- - Level sensor: AEB level sensor, standard sensor 0-90Ohm, non standard sensor
- Reduction gear temperature sensor: AEB sensor, type 369
- Gas temperature sensor: AEB type sensor (4.7kOhm)
- Oxygen sensor reading in voltage: 0-1V, 0-5V, 5-0V, 0.8-1.6V, 2.5-3.5V
- Management of AEB119B type switch
Quick delivery time (to Australia)48Hrs.
Arrived with all promised components and instructions.
Easy fit, upload software and tune.
Very Cost Competitive and WORKS!
Customers Also Viewed